Apple Remote Fernbedienung Macbook Pro Retina
Developer | Apple Inc. |
---|---|
Type | Infrared remote |
Release appointment | October 12, 2005 (Original) October 20, 2009 (Current, second generation) |
Successor | Siri Remote |
The Apple tree Remote is a remote control introduced in October 2005 past Apple Inc. for utilize with a number of its products with infrared adequacy. It was originally designed to command the Front Row media middle programme on the iMac G5 and is compatible with many subsequent Macintosh computers. The first three generations of Apple Goggle box used the Apple Remote equally their chief control mechanism. It has at present been replaced with the Siri Remote in the fourth generation. Prior to the Apple Remote, Apple produced several nameless IR remotes for products such as the Macintosh Telly, TV tuner expansion boards, and the PowerCD drive.[one] [2] [3]
Design [edit]
Plastic (2005) [edit]
The original Apple Remote was designed with six buttons and made of white plastic. Its shape and layout resembled the first-generation iPod Shuffle. A round Play/Interruption/Select push sat in the center of a larger four-push button circle of (clockwise): Volume Upwardly, Next/Fast-forward, Volume Down and Previous/Rewind. A separate Menu button was positioned below. The price was prepare at The states$29.00.[iv]
Aluminum (2009) [edit]
In October 2009, the remote was redesigned as a thinner and longer aluminum version. The new remote was released along with the 27 inch aluminum iMacs and multi-touch Magic Mouse. The Play/Intermission button was moved out of the center of the directional buttons and put beside the Carte button (nether the directional buttons). The symbols for the Book Up/Down and Next/Fast-frontward buttons were replaced with modest dots, to make it clear that the buttons were besides used to move upwards, downward, left, and correct inside menus. Along with the new design, the price was dropped to U.s.a.$19.99. In earlier aluminum remotes, the navigation ring was flush with the curvature of the remote's aluminum trunk. In the later revision, the band is slightly raised to get in easier to locate the ring by impact.
Replacement of the CR2032 battery in the original remote is done with a small pointed object such as a paper clip at the lesser correct border of the device, where the bombardment slides out on a tray. The newer version has the battery located behind a compartment in the center of the device which is accessed by turning a coin in the compartment door'south indent.[five]
Functions [edit]
The Apple Remote'south original function was to enable navigation in Forepart Row, which allows users to scan and play music, view videos (DVDs and downloaded files) and scan photos. Although Front end Row was removed from Bone Ten x.7 and later, some Apple software withal works with the remote. It can however be used to control presentations in Apple Keynote, slide shows in iPhoto and Aperture, DVD films via DVD Player, and to play video and audio in iTunes and QuickTime. Other software that is notwithstanding uniform includes Elgato's EyeTV iii.5, and VLC media actor. The remote tin besides be used to run presentations in Microsoft PowerPoint 2008 or in OpenOffice.org Impress.
Other functions controlled past the remote can include putting a device into slumber fashion, selecting a sectionalisation to kicking from on startup, and ejecting optical discs.[6] A device can be configured to answer only to a item remote.[7]
iPods [edit]
An iPod placed in a dock featuring an IR sensor can be used with the remote for music and media control.[8] The iPod's menus cannot exist operated with the remote. The Apple Remote can also exist used to command the iPod Howdy-Fi or third party devices tailored to it.[9]
Kick Camp [edit]
Starting with Kick Camp 1.two, the remote has some functionality when a user is running Windows. If iTunes is installed on the Windows sectionalization, pressing the Carte du jour button on the remote volition start the plan. The remote's media controls also support Windows Media Role player, every bit well as system volume command.[x] Other third party programs may also utilize the remote'south capabilities; media applications such a foobar2000 and Media Player Classic permit users to control their functions via the remote. Applications must be in focus for the remote to control them. Kick Camp 5, released on March 14, 2013, also includes drivers for the remote control.[11]
iOS App [edit]
Apple offers a gratis 'Remote' app for iOS devices (available in the Apple App Store) which allows for wireless command of iTunes on Mac/Windows computers or the Apple tree Television receiver.
Fourth generation Apple tree Television and the Siri Remote [edit]
The Siri Remote was launched with the quaternary Generation Apple Television in 2015. It uses both IR and Bluetooth to communicate with the Apple tree Tv. The remote has a trackpad, dual microphones, 5 buttons for Carte, Dwelling house, Siri and Play/Pause, and a Volume up/down rocker button.[12] Additionally it has an accelerometer (IMU) and a gyroscope[thirteen] which allows the remote to exist used every bit a gaming controller for tvOS apps and games. The remote (unlike previous generations) uses a built-in rechargeable Lithium Polymer Battery that is charged through a lightning port at the lesser of the remote.[xiv] In regions where Siri is not supported, the Siri Remote is known as the Apple TV Remote.[15]
On September 12, 2017, together with the Apple Telly 4K, Apple announced an updated Siri Remote, with a raised white edge around the carte du jour push and additional motion input for apps.
Compatibility [edit]
Model | Compatibility |
---|---|
MacBook | Original – Mid 2009 (Except White Unibody) |
MacBook Air | Original – Mid 2009 |
MacBook Pro | Original – Mid 2012 (Except Retina)[16] |
iMac[17] | G5 – September 2012 |
Mac mini | Early 2006 – Belatedly 2014 |
Mac Pro | None |
Earlier models of the iMac with polycarbonate enclosures featured a magnetic residuum for the remote,[xviii] which was later removed.
Use with new MacBook Arrogance, Retina MacBook Pros and older Macs [edit]
Using the Apple tree Remote with newer MacBook Air, Retina MacBook, or other Mac models without a born IR receiver requires a USB-based infrared receiver and additional software from a 3rd party.
Using Remote Buddy (from IOSPIRIT GmbH) or mira (from Twisted Melon), information technology is possible to connect an external USB receiver such as the Windows Media Center Edition eHome receiver, and use the Apple Remote on these machines with full back up for sleep, pairing, depression-battery detection and decision-making a variety of Apple and third party software. In addition, Remote Buddy is able to emulate events of an Apple tree Remote on these systems, enabling users to employ software written for the Apple Remote in exactly the aforementioned mode as with Macs that accept a built-in infrared receiver.
For the Apple computers without born infrared receiver, at that place is a miniature USB receiver (USBA or USBC versions), the SmartGUS,[nineteen] which allows to give back to iMac, MacBook and Mac Pro, the infrared functionality. In this case, all uniform software (iTunes, Keynote, PowerPoint, OpenOffice Impress, QuickTime Player, iPhoto, VLC, Kodi, Remote Buddy, Mira ...) tin utilize the features of the Apple Remote, the same as with the legacy built-in infrared receiver.
Infrared interference [edit]
Considering many electrical appliances apply infrared remote (IR) controls, concurrent use of the Apple tree Remote with other IR remotes may scramble communications and generate interference, preventing stable employ. Remotes should be used individually to circumvent the problem.[20]
Technical details [edit]
The Apple Remote uses a modified NEC IR protocol[21] which consists of a differential PPM encoding on a 1:3 duty cycle 38 kHz 950 nm infrared carrier. In that location are 32 $.25 of encoded information between the AGC leader and the end flake:[22]
Protocol | on (µs) | off (µs) | total (µs) |
---|---|---|---|
leader | 9000 | 4500 | 13500 |
0 scrap | 560 | 560 | 1120 |
i bit | 560 | 1690 | 2250 |
end | 560 | — | 560 |
While the Apple Remote uses the NEC IR protocol for the timing, the 32-fleck data package is in a different format. It consists of two 16 chip LSB words.
$.25 | Type | Comment |
---|---|---|
eleven | Vendor | This is always 0x43f and can be used to identify an Apple Remote |
five | Command Folio | 0x0 for the pairing and other commands, 0xe for the different buttons |
8 | Device ID | A unique device ID, used to permit pairing of a remote to a specific device. It tin can be changed with the pairing command |
seven | Command | Actual command for the Control Page |
one | Odd parity | All 32 $.25 added together accept to equal 1 |
This is the internal page tabular array (command page 0x00):
Value | Command | Description |
---|---|---|
0x01 | Pairing | Card + Select for 5s (pair & increase the Device ID) or Menu + Next for 5s (just pair) |
0x02 | Manufactory Defaults | Carte du jour + Previous for 5s |
0x03 | Low Bombardment | Former (white) Apple tree Remote |
0x07 | Depression Battery | New Apple Remote |
This is the command page table (control page 0x0e):
Value | Push | Command |
---|---|---|
0x01 | Menu | Carte |
0x02 | Play/Pause, Select | Play/Intermission, Select (On the white model this is the combined Play/Pause and Select button; on the aluminum model, this code is sent by both the Play/Suspension and Select buttons together with a prefix.) |
0x03 | Right | Next/Fast-Forward |
0x04 | Left | Previous/Rewind |
0x05 | Upwards | Book Upward |
0x06 | Down | Volume Down |
0x07 | Play+Upwards | Play/Interruption + Up pressed together |
0x08 | Play+Down | Play/Pause + Down pressed together |
0x09 | Play+Next | Play/Suspension + Side by side pressed together |
0x0a | Play+Previous | Play/Intermission + Previous pressed together |
0x0b | Menu+Upward | Card + Upward pressed together |
0x0c | Menu+Down | Menu + Down pressed together |
0x0d | Bill of fare+Play/Intermission | Carte du jour + Play/Suspension pressed together |
0x0e | Menu+Next | Menu + Next pressed together |
0x0f | Menu+Previous | Menu + Previous pressed together |
0x2e | Select | Select button prefix, on aluminum model only |
0x2f | Play/Pause | Play/Pause prefix, on aluminum model only |
To maintain astern compatibility with older devices such equally the iPod Howdy-Fi, the aluminum Apple tree Remote does not replace the existing IR code for Play/Pause/Select. Instead, to let newer devices to distinguish between the split Select and Play/Intermission buttons, it sends two IR codes for each press of those: a prefix lawmaking (0x2e and 0x2f, respectively), followed by the original Play/Pause lawmaking (0x02). Older devices ignore the prefix code and thus interpret either button as Play/Pause, while newer devices interpret both codes and use them to determine which button is being pressed.
Come across besides [edit]
- Siri Remote
- Apple Boob tube
- Front Row
- iTunes Remote
- Remote control
References [edit]
- ^ "VERY RARE - REMOTE for the Blackness Apple tree Computer Macintosh Goggle box - RMC-A1 1993". eBay . Retrieved July 14, 2016.
- ^ "Apple Macintosh Performa Television receiver Tuner Board 820-0549-A Power Mac Video Capture Card". eBay . Retrieved July 14, 2016.
- ^ "VINTAGE Apple tree RK6934/321 PowerCD CD Drive Player Remote Control w/ Batteries". eBay . Retrieved July 14, 2016.
- ^ Apple Computer Universal Dock and Apple Remote, Oct 21, 2005, retrieved January 31, 2014
- ^ How to supercede the Apple tree Remote battery, Apple Inc., June 6, 2008, retrieved June 21, 2010
- ^ Startup Manager: How to select a startup volume, Apple Inc., March 23, 2009, retrieved June 21, 2010
- ^ Pairing your Apple Remote with your reckoner, Apple Inc., Nov 24, 2009, retrieved June 21, 2010
- ^ Pairing the Apple Remote with the iPod Universal Dock, Apple tree Inc., May 3, 2010, retrieved June 21, 2010
- ^ Using the Apple Remote with iPod Hello-Fi, Apple Inc., April 14, 2008, retrieved June 21, 2010
- ^ "Kicking Camp Installation & Setup Guide" (PDF). Apple tree. Archived from the original (PDF) on July 29, 2012. Retrieved June 14, 2012.
- ^ "Boot Campsite 5: Frequently asked questions". Apple. Retrieved Jan 31, 2014.
- ^ "Use your Siri Remote or Apple Goggle box Remote with Apple TV (4th generation)". Apple tree Inc. Retrieved June 28, 2016.
- ^ "Siri Remote and Game Controllers - tvOS Human Interface Guidelines". Apple Inc. Retrieved June 28, 2016.
- ^ "Accuse your Siri Remote or Apple Tv Remote". Apple Inc. Retrieved June 28, 2016.
- ^ "Use Siri on your Apple Tv set (4th generation)". Apple Inc. Retrieved June 28, 2016.
- ^ "What Remotes Are Uniform with a MacBook?".
- ^ "Remote Buddy Supported Hardware". IOspirit. Retrieved December 20, 2013.
- ^ iMac (Mid 2007): No Remote residuum for Apple Remote, Apple Inc., August 13, 2007, retrieved June 21, 2010
- ^ https://gusdevices.wixsite.com/smartgus/description [ expressionless link ]
- ^ Apple TV: IR interference can prevent your remote from working, Apple Inc., March 22, 2007, retrieved June 21, 2010
- ^ "Search | Online Documentation for Altium Products".
- ^ Callendrello, Casey (October 11, 2008), Apple Remote library for Arduinio, caseyc.net, archived from the original on December 8, 2015, retrieved November 27, 2015
External links [edit]
- About the Apple tree Remote control
Source: https://en.wikipedia.org/wiki/Apple_Remote
Posted by: fordthisis1996.blogspot.com
0 Response to "Apple Remote Fernbedienung Macbook Pro Retina"
Post a Comment